Category Archives: Scale Models

Scale models.

Dragon – 7439 – Long Range Desert Group Patrol Car w/Lewis Gun

Recently I’ve seen a picture of a LRDG Chevy used by the British army in the desert in WWII, and I instantly fell in love with it. I checked the offer in 1/72 scale and found this Dragon kit. _MG_8313-004

Well, what’s inside this box doesn’t provide the quality you would normally expect from a Dragon kit… at least from their golden era. Though there are good parts, the general impression is the kit was done in a hurry.

_MG_8314-005 _MG_8312-001

The biggest disappointment are the wheels; they are one piece, not like the CAD drawings on the box showing separate tires and wheel rims. All four road wheels look the same, but in reality the bolt circles of the back wheels is noticeably larger. The tire tread is not very deep and a there is an ugly moulding seam, whose removal will further damage the surface. And there is more bad news: all wheels were moulded with a hollow back!

So I’ve searched for a good PE set and Hauler came to my rescue. Besides metal parts, you get two beautiful Lee Enfields, a crate, some cans, a shovel – all in resin.

_MG_8317-008

_MG_8323-012

Hauler also provides, as a separate upgrading set, four road wheels and two spares, an excellent representation of the real thing. _MG_8318-009

With the Dragon wheels.

_MG_8322-011 _MG_8321-010

In conclusion, this is rather a mediocre kit compared with Dragon’s own high standard visible in their previous releases. At least an upgrade set for the wheels is a welcome addition.

Model available in our searcher, here.

Something moving in Poland…

Well, as for sure many of you know, this year, 2014, is the 75th anniversary of the start of the Second World War. Considering his start as September 1939, with the German invasion of Poland, although certainly other events preceding this data advocate Europe and World to war.
Is interesting, to have a brief idea, take a look at this Timeline in the WikiPedia.

But for our today’s proposal, we don’t wish to start any controversial, the Second World War started on 1st September 1939, at 4:45 a.m, is not our scope give any history lesson, so if you are interested on this, for sure you can find thousand of references in Internet, with different points of view about the conflict, facts, numbers, consequences and so.

We wish to talk today about a military genre, poorly covered in our favourite scale, 1/72, during decades, The World War II Polish Army, and overall, the early stages of the Second World War, from the invasion of Poland to the ‘Fall Gelb’.

FTFlogoWe will start talking about “First to Fight”, a commemorative publication raised in Poland, which also issue a related 1/72 scale model with each number, they have the support from IBG for the production and by now 5 numbers have been issued:

First to Fight – 05 – Polish TK3
First to Fight – 04 – SdKfz. 265 Panzerbefehlswagen I Ausf. B
First to Fight – 03 – C2P
First to Fight – 02 – Pz.Kpfw. IA
First to Fight – 01 – Polish TKS Light Tankette

And many more are to come, including an infantry figure set, a topic which previously, was only covered by the infamous Hät set, so we expect a lot of this range.
Their quality is good, although they are “fast kits”, and the models issued to the German Army are also very interesting ones. Another fact about this models, is his very cheap price, which make us wonder by an Italeri (ESCI) mould used for decades is so expensive, or Revell, or the worst case, Airfix.

To show how this models looks like, we specially lithe the excellent work done by Artur Wałachowski. To see more, a contest is spotted in the brand site, here.

First to Fight – 02 – Pz.Kpfw. IA - Painted by Artur Wałachowski
First to Fight – 02 – Pz.Kpfw. IA – Painted by Artur Wałachowski

First to Fight – 01 – Polish TKS - Painted by Artur Wałachowski
First to Fight – 01 – Polish TKS – Painted by Artur Wałachowski

At this point we must cite brands such S-Model, already doing a nice effort for early war subjects.
Previous to this one, only RPM have a decent range for the Polish Army.
To end with the scale models, we wish also to mention ACE, who has released a 37mm Polish AT Gun wz.36 and two early French army topics, 3,5t truck AHN and S.A. Mle 1934 25mm anti-tank gun.
So as you can see, the list is slowly growing , and we want more.

scibor-logoSo, with so many model ahead, more figures are needed !!!, while we wait for the First to Fight’s infantry set, some other are taking care of this gap. Scibor Monsterous Miniatures, a well know manufacturer of fine and impressive 28mm fantasy figures, has started an historic line, in 1/35 but also in 1/72 scale, dedicated, by now, only to cover the Polish Army.
By now they have 4 references (in 1/72 scale):

1×72 Polish Officers 1939 Set #1 72HM0008
1×72 Polish TKS Tankette Crew Set #1 72HM0003
1×72 Polish TKS Tankette Crew Set #2 72HM0005
1×72 PolishCKM Wz 1930 with Crew Set #1 72HM0006

In their immediate plans, Polish infantry 1939 and drivers for Polish Fiat 508 and C2P artillery tractor…

Scibor - Wz 1930
Scibor – Wz 1930
Scibor - Polish Officers
Scibor – Polish Officers

Scibor, we want Stanislaw Sosabowski in 1/72 scale !!! It’s indispensable to play a Bridge Too Far game.

And that’s all for today, we want more of this early war coverage, for our taste, operations during the invasion of Poland, also the ones during the operation Fall Gelb, can be very interesting for games, so more Polish, French, Dutch and Netherlands troops are needed !!!
We will keep an eye on further developments by Scibor, and each issue of First to Fight is added to our listing in the database section.

Zvezda – 5011 – IS-2 – Finished Model

This was my longest built to date. After the initial paint, I waited a couple of days, then applied the first oil wash in darker tones. I sealed it with Vallejo’s flat varnish, then added more oil colors, this time mixed to represent the dusted areas. Another coat of varnish, and then the final grease spots and other small details. For the first time I used Mig Jimenez Abteilung 502 oil colors, and I must say they are great.

The tracks were painted with Vallejo German Camo Black Brown, which is the best color in their range for bare metal. Some oil washes for the dust, then pigments and this is it. The raised surfaces on the tracks, as well as the contact surfaces of the road-wheels were “polished” with AK Dark Steel pigment, a GREAT product, also designed by Mig Jimenez. The shovel and cables were painted separately and added at the very end.

It’s time to work on the diorama!

_MG_8270-001 _MG_8273-002 _MG_8274-003 _MG_8276-004 _MG_8277-005 _MG_8278-006 _MG_8279-007 _MG_8281-008

1/72 Trumpeter – 07272 – Jagdpanther, Finished model.

Little about history:

The Jagdpanther (German: “hunting panther”) was a tank destroyer built by Nazi Germany during World War II based on the chassis of the Panther tank. It entered service late in the war (1944) and saw service on the Eastern and Western fronts. The Jagdpanther combined the very powerful 8.8 cm PaK 43 cannon of the Tiger II and the characteristically excellent armor and suspension of the Panther chassis, although it suffered from the general poor state of Germany in the later part of the war, which resulted in small production numbers, shortage in spare parts and poor crew training.

About kit:

Models of “trumpeter” always very accurate and of good quality. This model is not exception. Kit is very easy-going, and does not require any modifications. Aside from a small amount of putty.

It is a pity that in 1:72 scale of Trumpeters sets do not have photo-etched parts.I think the bars on the engine compartment would be nice.

About painting: as in my past work, a little later I’ll show all the steps in a histogram. Like we Slavs saying “Better to see once than 100 times to hear” )

Thats all!1 2 3 4 5 6 7 8 9 10 11 12 123123

 

 
The trumpeter model is available in Ebay through our listings here.

1/72 Trumpeter – 07284 – T-55 with BTU-55 (Iraq), Finished Model

Bulldozer T-55 BTU comes from battle tank T-55 1967 release. It is equipped with a dozer blade for earthworks. The equipment can also be used for stacking and explosion elongated charges with which usually created dividing strips in case of major fires.

15

About kit:

It going very simple, like any set of Trumpeter.I did not like rail thin, which I immediately got rid of. Replaced them from stretched sprue. In the box are terrible vinyl tracks. But there was nothing to replace them. Model to be interesting, I added rubber sheets and chain.

There no historical reference. This collective image of many Iraqi tanks.The model was painted with acrylic paint, tinted oil paints and MIG pigments.

14 13 12 11 10 9 8 7 6 5 4 3 2 1

This model can be found through our utility here.
 

1/72 – UM – 322 – SU-12, Work in Progress

SU-12 Soviet self-propelled artillery chassis trucks “Morland” and GAZ-AAA. Armed with short-76.2-mm cannon sample 1927 installed on column book-rests on the installation location of the cargo hold.

The Kit is very simple and neat. Several items was made ​​of tinplate. Replaced some parts that are not too ambitious such holes for viewing slots in the gun’s shield.
11111

Painting: Base, color modulation, chipping, dark brown and light dusty wash…

This is a small tutorial on the work done.Maybe it will help someone to work on such a small scale.Used only art paints (acrylic and oil), so I can not give numbers of model paints.After the final of this model, I’ll post a similar tutorial.

4bo

1 2 3 4

More to come soon !!

 

UM(MT) – 404 – Т-26Т+ ACE – 72216 – 10,5 cm leFH 18, 1:72

T-26T – the pre-war Soviet tractor.

History.

According to the adopted “Program tank-tractor weapons the Red Army” was assumed on the basis of the production of tractors tanks.. The project is of such a machine , which received the name of ” Fighter “, was made ​​on the basis of the T -19 in 1930 , but mass production did not go, because the preference was given to a similar car on the chassis of the T -26. In the spring of 1932 at KB Voroshilov plant were developed two projects artillery tractors – one with a canvas top , the other with armored. Both projects were launched in the series in 1933.

Most of these machines have been lost in the first weeks of ’41, along with the other equipment of the Red Army. That’s why I decided to make it a tractor of German howitzers.

The model has been refined. Made the right hitch. Did the stairs in front. Thinning fender. And a little bit of different small parts .At the beginning model has been painted in the ” field green”. Then covered with hairspray, and painted in German gray. Next chipped. Assembling the model has not caused problems.

With howitzer was a bit more of a problem with the assembly. Since this ACE. But a little patience, and as usual the set of “ACE” can get something decent. Howitzer is painted in the same color as the tractor. Some color modulation, pigments and toning oil.

Vignette made ​​of plaster. Grass – Sanitary flax. pillar – toothpick.

1 2 3 4 5 6 7 8 9 10 11 12

1/72 PST+Zebrano – 72004 – KV-7 (KV-6 SPG) Stalin’s Leviathan, Finished

A bit of history :

KV -7 ( Object 227 ) – Experimental Soviet heavy self-propelled gun ( SPG ) of the period of the Great Patriotic War.This war machine was developed design office Chelyabinsk Kirov Plant ( CHKZ ) in November 1941 under the leadership of Joseph Yakovlevich Kotin , Chief Designer of Russian heavy tanks and self-propelled guns of the time. In the creation of the KV- 7 also participated LE Sychev ( chief engineer ) , GN Moskvin , weapons designer of the Ural Heavy Machinery Plant ( UZTM ) KN Ilyin and GS Efimov . The car was first built in the Soviet heavy self-propelled guns during World War II. Although adopted the Workers ‘ and Peasants’ Red Army KV-7 has not been taken and the standard was not made, resulting in its development experience has allowed later in a very short time to create a serial SPG in this class.

This set consists of quite old kit PST and additional details from the company Zebrano. Of the additions Zebrano has 3 metal barrel and resin turret.

Set at first glance looks poor, but the assembly does not cause problems. Detailing is not bad, but almost all of the small details come together with one large piece. Casting quality is not bad, but the tracks are made fairly primitive, but better than the Pegasus)).In this work, there is no historical authenticity, because after the unsuccessful tests this tank was dismantled for scrap. But in my work, I gave him a second life to some alternative history. The upper armor plate I had left in the primer color, as is sometimes done in Panzerwaffe 46. Model painted as usual with artistic acrylic Polycolor, MIG pigments, and oils.

12 11 10 9 8 7 6 5 4 3 2 1

1/72 – UM – 214 – M4A2 with M1 Dozer Blade, FINISHED Model.

A bit of history:

The destruction generated by military operations, and various obstacles deployed by the Axis forces to slow down the progress of the Allied armour led to the need for a dozer tank. The US Army needed an armoured dozer able to clear roads, fill in ditches and bomb craters, clear rubble and move destroyed vehicles blocking roadways. The allied armies used several types of bulldozer, however, these machines were un-armoured and could be used only in zones far away from the frontline.

This is one of my first works in the scale of 72th, after 35th scale of the model I have tried to carry out a full list of all the weathering techniques.

Green came out a little more green than allies, but I did not repaint it all over again. Dozer blade I dyed in three stages.The first struck a subterranean dark red (the color of burnished steel), then the method of hairspray struck green, a little flush green, repeated the same trick with Metallic paint. Model painted as usual with artistic acrylic Polycolor, MIG pigments, and oils.

Assemble this kit was easy. Problems perhaps made ​​only tracks. A little bit of Tamiya putty and the model is ready.

photo_9_1370446724

photo_8_1370446724

photo_7_1370446724

photo_6_1370446724

photo_5_1370446724

photo_4_1370446724

photo_3_1370446724

photo_2_1370446724

photo_1_1370446724
 

This is an out production set, but from time to time, some one appear on Ebay, see here.

Zvezda – 5011 – IS-2 – Turret Construction Review

I started the construction of this kit with the intention to build an IS-2 that took part in the battle for Berlin. I plan to place it in a small diorama at the end.

During my research I’ve learned that IS-2 turrets were made by three different factories: UZTM, Hammer & Sickle and Factory no. 200. I opted for a Factory 200 turret, as the tank I want to build seems to have all its trademarks. Among these, some are quite noticeable: low casting seam, smooth commander’s cupola, big numbers on the back – usually one letter and a digit above a group of three digits.

Unfortunately, Zvezda provides a muzzle brake that is too short, so I had to buy an aftermarket one from Aber, which is far from being perfect. I had to rework the muzzle brake, as it lacks all of its casting marks and contours.

The rain guard above gun mantlet lacks the hinged front section so I had to improvise one. I added pistol ports and the caps of the gun trunnions by cutting small styrene discs. I thought the Mk. IV visors were too small so I replaced them with new ones made from scraps.

I added grab handles and textured the surface with Mr. Surfacer 1000. An old Italieri IS-2 provided a nice option for the commander’s cupola hatch, and has some interior details. Though remained closed, I decided to stick with Zvezda’s loader’s hatch, as I think it has very nice details. There are two pairs of bolts on this hatch that must be shaved off and replaced with holes with the same diameter.

The round mobile part of the 7.62 mm DT machine gun was taken from Italieri IS-2, as Zvezda’s seemed a little too flat compared to the real thing. I replaced the barrel with a syringe needle and added few bolts and other small details. The casting numbers are made from brass wire and simply glued into place.

muzzle brake

_MG_7663-006 _MG_7658-001 _MG_7659-002 _MG_7662-005 _MG_7660-003 _MG_7661-004

Self-propelled 15cm sIG-33/2 auf Jagpanzer 38(t), UM, finished

This self-propelled gun was planned as a replacement for not much successful SPG  “Grille”. Later, as an attempt was made to set the base s.IG.33 light tank destroyer Jagdpanzer 38 (t) «Hetzer”, but according to historian Thomas Yenttsa, documentary evidence of serial production of this model no. Issued SPG Grille fought until the end of the war, now aware of one survivor of this type of car is exhibited at the Museum of Aberdeen Proving Ground U.S. Army.

I made this SPG as field modification. With add-on armor that I do not crumble in camouflage. Camouflage the rest of the armor I picked up from the standard three-color camouflage of Hetzer. Model painted as usual with artistic acrylic Polycolor, MIG pigments, and oils.

This set was fairly easy to assemble, and did not bring problems to fix some of the shortcomings casting.

14 13 12  10 9 8 7 6 4  3 2 1

 

This model and all the UM range can be found through our utility here.

12.8 cm Kanone 81(K-81/2), ACE, Finished

12.8 cm Kanone 81(K-81/2) was a German heavy anti-tank gun designed to fight against heavy Soviet tanks like IS-2. The German army had encountered the Russian 122 mm guns and had issued a requirement for a similar weapon. Approximately 50 barrels and breeches were used on existing carriages. The weapon that used the ex-French GPF-T carriage was known as the K 81/1 while the K 81/2 used the ex-Russian A-19/ML-20 carriages with shield and balancing gear removed. the cradle and recoil system were discarded and the 128mm gun was mounted in a ring cradle similar to that used on the 81/1. Another version K 81/2 was also built, in which original Russian equilibrators were retained.

5

I would like to start with the quality of this kit. In the tradition of ACE casting quality is not very good, but this set is not worse or better than other sets of ACE. It will take a lot of patience to clear items from the remains of molds. But it will be rewarded with an excellent model in the end. Kit has a lot of details for this scale. The model can be assembled as in marching and firing position. For marching position provides transport trolley.

3

Model painted as usual with artistic acrylic Polycolor, MIG pigments, and oils. To make the model look more dramatic I painted the carriage in dark red primer. This is typical of the last months of the war, when the equipment could get to the fight not fully colored, because of the grip of time due to the advancing Allied troops. I didn’t much spoil this model with mud, as it did for urban combat. By using this pigment: light dust and concrete.

8

7 6 4 2 1

This model can be found through our utility here.

UM – 387 – Self Propelled Gun SU-122P – Finished Model

SU-122P – Soviet experimental self-propelled gun, created on the basis of self-propelled gun SU-100. Not commercially produced.

8

The model is going without historical reference. Since I do not like clean and brand-new models, which is why doing this model after many battles. I used only Italian art paint Polycolor, and weathered it with oils and MIG pigments. I made model with some minor modifications, but basically kit is made out of the box.

7

9

2

This model and the full UM range can be found through our utility here.

1/72 IS-2 Comparison: Zvezda, Italieri and PST

This is my all-time favorite tank and I wanted to build it for a long time; I already had Italieri and PST kits and I was ready for a kitbash. However, when I heard Zvezda will release its own version (a snap fit), and knowing the quality of its earlier releases (T34, Tiger I and Panther Ausf D), I decided to wait. And the wait was worthwhile. This is not a comprehensive review, just a few shots with the main parts (I didn’t removed the flash on any part, just detached it from the sprues).

The boxes:

_MG_7250-014

_MG_7249-013

_MG_7248-012

The upper hull (Zvezda on the left, Italieri in the middle, and PST on the right). Italieri’s hull is a little bit short, both Zvezda and PST seem to have the right proportions, Zvezda has the nicest details of all:

_MG_7242-009

Lower hulls (same order). I took an extra shot with Zvezda’s lower hull, looks like Dragon style, with superb details :

_MG_7234-004

_MG_7244-010

Tracks:

_MG_7231-002

_MG_7230-001

Road-wheels:

_MG_7241-008

Wheel drives:

_MG_7238-005

Gun barrels. I added the metal Aber barrel just for comparison. I don’t know if I’m right, but I think this is Zvezda’s only soft spot: the gun muzzle brake is maybe a little too short.

_MG_7247-011

The turrets. Italieri is the only one with a very nice cast texture (present on the hull also). All Zvezda hatches are closed (maybe another minus).

_MG_7233-003

General shots with Zvezda kit sprues. The DSzK 12.7mm machine gun has amazing details, and I think is the best plastic replica in 1/72.

_MG_7240-007

_MG_7239-006

 

I think the conclusion is obvious: Zvezda IS-2 is the best on the 1/72 market today.
All the models showed here can be found through our utility in Ebay.

1/72 – Roden 706 – Sd.Kfz.233 “STUMMEL”

Sd.Kfz.233 “STUMMEL”

During the initial stages of WWII (1939 – 1941) heavy eight-wheeled armored cars of the Sd.Kfz. 231 (8-Rad), Sd.Kfz. 232 (8-Rad) and Sd.Kfz.263 (8-Rad) types were widely used in all the major theaters of war with considerable success. Reconnaissance and support of the front line were still their primary missions, however quite often when fulfilling these missions (especially on the Eastern Front), reconnaissance units met with strong opposition from the enemy, often including artillery. This problem could be resolved only by the introduction of a special support vehicle with a higher caliber armament, teamed up with the reconnaissance units, already equipped with standard Sd.Kfz. 231 (8-Rad), Sd.Kfz.232 (8-Rad), and Sd.Kfz.263 (8-Rad) cars.
As part of the experimentation, in 1942 at the Bussing-NAG plant, the 75mm KwK L/24 gun was mounted on one of the regular Sd.Kfz. 231 (8-Rad). Due to the short length of the barrel, this gun was nicknamed ‘Stumpy’. Though the dimensions of this gun were insignificant, it was still too big for the armored body of the Sd.Kfz. 231 (8-Rad), therefore its design had to be modified. The turret was completely demounted, and most of the equipment unrelated to artillery support was removed. In spite of all these measures, the crew decreased from four to three persons due to the lack of free space inside the armored body.
The vehicle turned out to be very successful, but it was never put into serial production. Relatively small numbers of these vehicles were needed for artillery support; also after continuous military action more and more Sd.Kfz.231 (8-Rad), Sd.Kfz.232 (8-Rad), Sd.Kfz.263 (8-Rad) were being returned to plants in Germany. As a result, the heavy armored artillery support vehicle Sd.Kfz.233 (the name of the new development) was built at the Bussing-NAG plant. Construction was undertaken using parts from its predecessors. However, unlike them, the Sd.Kfz. 233 did not have ‘8-Rad’ in its type name, since the analogous six-wheeled vehicle did not exist.
The Sd.Kfz. 233 proved to be a serious weapon. The major threat for these vehicles came from ground attack aircraft – the big opening on the top of their armored bodies was very vulnerable to bombs or strafing. Despite the small quantity of Sd.Kfz.233 built, they were actively used in every theater of conflict, from 1942 until the final days of the war.

Model is very fine, no burr or sink marks, no curvature on parts.
Some small parts have been done by scratch, as side fasteners, clamps for cans, anterior antennae (from stretched sprue) and canvas.
Acrylic paints, oil weathering and pigments.

photo_12_1373272570

photo_10_1373272570

photo_7_1373272570

photo_6_1373272570

photo_5_1373272570

photo_4_1373272570

photo_3_1373272570

photo_2_1373272570

photo_1_1373272570

This model can be found in our Ebay searcher utility here.

1/72 – PST – 72059 – KV-220

KV-220

The Kliment Voroshilov (KV) tanks were a series of Soviet heavy tanks named after the Soviet defense commissar and politician Kliment Voroshilov and used by the Red Army during World War II. The KV series were known for their extremely heavy armour protection during the early part of the war, especially during the first year of the German invasion of the Soviet Union.

KV-220 (Object 220) – Was an experimental tank based on KV-1. Longer chassis (7 rollers per side). Armor – 100mm. New 850 hp V-2SN engine with turbocharging. New diamond-shaped turret and 85mm F-30 cannon. One prototype was constructed in 1941. The tank was lost in battle.

photo_16_1371716371

photo_8_1371716371

photo_7_1371716371

photo_6_1371716371

photo_5_1371716371

photo_4_1371716371

photo_3_1371716371

photo_2_1371716371

photo_1_1371716371

You can fin this model in our utility here.

Cromwell Mk. IV – Revell 1/72

When I heard Revell reissued its Cromwell Mk IV in late 2012, I wanted to build one; this is one of their greatest kits and perhaps one of the best in 1/72 scale, every nut and bolt is in its place. I thought I could use a photo-etched set from Part, but this Cromwell is one of those rare kits so well detailed it makes the PE upgrade almost useless; some kit parts are even better than PE replacement options. The Aber gun barrel though is a nice addition.

_MG_6704-001

The assembly of the kit is easy enough, but some special attention is required at several construction sequences; dry fitting and good reference photos makes this job a lot easier. For example, I hastily glued the rear hull plate only to find out it was too low. Luckily, only a couple a minutes passed and I was able to undo with minimum damage. I was not the only unfortunate who made this error, as I later discovered. That’s why a good research before every building is a must.

_MG_6700-004

The tracks are Revell style: link & length type, with few longer sections, very well detailed on both sides. As I’ve learned from other builders of this kit, it is better to switch the top and the bottom sections, as the top section is a little longer and connects better with the other sections under the road-wheels. Cromwell doesn’t have return rollers, so you don’t have to worry about the track sag.

_MG_6703-002

The turret is nicely done, with the bolted armour plates as separate parts. Only the commander hatch can be left open; I detailed it with eight bolts and the closing mechanism. Other additions were the antenna mount and the searchlight prop from the PE set, and the wirings of the searchlight.  I also drilled both MG barrels and the searchlight to better represent the lenses and added periscope covers.

_MG_6702-003

In my opinion, the only parts that are a little overscaled and need to be replaced are the front light guards. Just use the plastic part from the kit as template and bend an ordinary brass wire into shape. I also wanted to add the tow cables, as Revell didn’t provide it; at least I could use the plastic eye loops. However, I discovered the Cromwell towing cables were quite complex in reality, and very hard to replicate in 1/72 scale, so I gave up.; I scratched the supporting brackets of the cable, though.

One detail that I spotted on the reference photos and baffled my mind was the supporting arm mounted on the right front fender with a steel rod at its end. I find out it was some kind of an orientation device for the driver. A missing detail from the kit are the little fender headlights; I made them from styrene and added wirings. The side fenders and the running gear are not glued permanently, so I will be able to paint them more easily.

_MG_6699-005

Revell changed the markings from the old decal sheet. The incorrect white “45” on a red square for the 11th Armoured Division is now replaced by a black “40” over white. I don’t know if this is correct, some modelers pointed out that a white “45” over green/blue is more historically accurate. The other marking is Cromwell Mk.IV of 2nd Squadron, 2nd Battalion, Reconnaissance Regiment of the Welsh Guards Armoured Division, Normandy, France, summer 1944.

cromwell5

In conclusion, this is an excellent kit, with lots of room for details, but easy to build just “out of the box”. Highly recommended!

Zvezda 1/72 Panther Ausf D

Ever since I build Zvezda’s excellent T-34 snap kit, I’ve been looking forward for their next releases in 1/72 scale: a Panther Ausf D and an IS-2. While the IS-2 launching was postponed several times, the Panther finally arrived in late 2012. Dragon released its own Panther Ausf D in 2012, marketed also as “early”, but it seems it is a mix of early and late Ausf D features. Though Dragon offers a really nice and highly detailed kit, it seems Zvezda’s Panther is a more accurate early D version. And, much more cheaper!

IMG_6487-007

Inside the box there are two sand coloured sprues with kit parts, a separate black sprue with the tracks, a decal sheet and instructions. IMG_6482-004 IMG_6486-006

All hatches are closed, so I’m sure some modelers will complain, but personally I don’t mind. Instead, I welcome a few really nice touches, as the weld seams, separate OVM tools and tow cables, and very good molded gun so there will be no need for an after-market one.

The track runs are one-piece with grooves molded-in that will help bending the tracks around the idlers and driver wheels. Again, the details on the tracks is very good.

IMG_6472-001 IMG_6473-002

The kit doesn’t provide the mesh screens for the engine deck, but this can be solved with a photo-etched set.

Decals are well printed and provide two marking options – both from the battle of Kursk.

IMG_6496-014

Instructions are clear and concise and are offered both in Russian and English.

IMG_6488-008 IMG_6489-009 IMG_6490-010 IMG_6491-011

In conclusion, this is a very good and accurate kit. It should be recommended also for its highly competitive price. I will probably buy a PE set from Part and with other few minor improvements I’m sure it will turn out into a fine looking model.

Pz.Kpfw. II Ausf. C – S Model, finished

After the construction of this kit, I continued with painting and weathering. I like the Panzer grey colour, but I find it quite difficult to bring it to life.

The turret doesn’t have decals because the yellow numbers turned green, through a mysterious chemical process, or maybe just because they were too thin. There are also white numbers on the decal sheet, but I finished it without registration.

The weathering was made with oils and Vallejo pigments.

_MG_6567-006_zps788db0c2

_MG_6565-005_zpse232be9d

_MG_6562-003_zpsa852cecd

_MG_6559-001_zpscb337111

_MG_6571-007_zps176886df

Though marketed as a quick assembling kit, this Pz II from S-Model turns into a great little tanks, with lots of potential for upgrading.

Pz.Kpfw. II Ausf. C from S-Model PS720001

The announcement of this kit was received with enthusiasm by many modelers in 1/72 scale, as a decent Panzer II was eagerly waited. S-Model delivers a very nice quick-build version, with an excellent moulding quality, but also with few shortcomings.

IMG_6205-009

The good news is there are in fact two kits in the box, packed in two identical bags.

IMG_6202

And there’s even more: the box includes a small PE fret (exhaust cover and a plate for identification number) and two turned brass gun barrels to replace the plastic ones, which are also very detailed. Besides that, S-Models included two MG34 with tripods (I don’t know why, but a welcomed addition for a diorama).

IMG_6207-010

I started the construction with the intention to build it out of the box. For those who want to add a few extra details, there are some things to consider: the lifting hooks on the front are missing, there is no horn, and also the towing pintle is missing. The tracks, though very well engineered (they come together as a single piece with the road wheels), are lacking in details as compared to the rest of the kit. There is also a very annoying seam line on the face of the tracks. The hatches on the turret can be represented both opened or closed (there are parts for both options). No interior detail, though. I drilled the headlights and the exhaust, and probably I will add other details later.

_MG_6210-001 _MG_6211-002 _MG_6212-003 _MG_6213-004

In conclusion, this is a very fine kit, which can be built into a good model with minimum effort, with plenty of details.
Buy this set though our utility saving some money here.

1/72 MACO – 7206 – sWS with 3.7cm FlaK43

Probably this is the kit that I wanted more since starting scale modelling. Unfortunately, I couldn’t get one sooner, but the wait was worthwhile. The sWS is fabulous, and its tracks are probably the best I’ve seen in 1/72 scale, very delicate and detailed, yet remaining “in scale”. I used a PE set from Part, but this kit really goes fine just out of the box. There are a few pin marks on the cargo, but that can easily be solved with mr. Surfacer or any other putty.

_MG_5335-005 _MG_5460-002 _MG_5461-003 _MG_5462-004

The Flak is also very good, though the shield is a little too thick, but the excess could easily be sanded off. Besides that, I added few other details, based on some reference photos. I purchased the brass chains for the cargo separately.

_MG_5566-005 _MG_5568-001 _MG_5569-002 _MG_5571-004

The most difficult part was to scratch the spent shell basket, which was missing from the kit. I used a Lipton tea bag for the net and stretched sprue for the frame, and I was very happy with the result.

_MG_5708-001 _MG_5706-002 _MG_5703-003 _MG_5566-005

After the construction I airbrushed the basic colours, while the camouflage pattern was brush painted.

_MG_6007-003 _MG_6008-004 _MG_6006-002 _MG_6005-001

After that, I applied oil colours for the weathering and some pigments. And I made a little base with cobblestone using some kind of insulation foam engraved with a toothpick.

_MG_6146-006_zpsf6551d3c _MG_6145-005_zpscbc51582 _MG_6143-004_zpsf190512b _MG_6142-003_zpsad21bbc5 _MG_6140-002_zps55226d4e _MG_6134-001_zps9a9a78dc

In conclusion, this is one of the finest kit I have ever built in 1/72 and the one that I’ve enjoyed most so far.

All the MACO range is available in our Ebay search utility, take a look here.

Inbox Review – Miniart – 72019 – CITY BUILDING

We take a close look to one of the recently released buildings in 1/72 scale by Miniart, concretely the Miniart – 72019 – CITY BUILDING

IMG_0303

The first than will caught your attention are the 185 parts that compound this box !!!!

IMG_0304

Instructions are clear and complete, they follow the color guide of the parts making it more easy. Although there are only 22 steps to build the house, note that some of them are x6…

IMG_0305

IMG_0306

As you can see, it’s a well bunch of sprue.

IMG_0307

All the parts have a correct pattern, below in detail one of the roof plates.

IMG_0308

And now, some detail for bricks…

IMG_0309

Doors….

IMG_0310

Railings..

IMG_0311

And stone parts…

IMG_0312

IMG_0313

The parts fit perfectly, all are clean cast, although you need glue, they don’t are snap together parts.

IMG_0314

Detail is only for visible side of the parts, as you can see below, and that’s general for all the parts, there are any details inside the building.

IMG_0315

And that’s the big odd of this buildings, they are pretty good, big enough for 1/72 scale, well cast, nice detail, but they haven’t interior detail at all, making them less usable for gaming. In a building like this, with three floors, there aren’t floor for any of them and the roof is not planed to be removable, although that can be easily achieved.
So these building are though to be part of dioramas, or to decorate gaming tables, but can’t be used to play inside them, or it will take you a lot of work to achieve it. Add removable floors also can be achieved, but interior details of the plates is none, and inside sight for windows and so is also ugly.

By the way, the prepainted parts also haven’t any value for us, unless they make clear and easy the build up process. You must prime before paint, so all this colors will be lost after built the model. If you don’t plan to paint the model, the finishing will be very basic, remembering us to the railway buildings models.

If you take care of this questions, you will get a perfectly cast and engineered building.

Revell – 03147 – HMMWV “Hummer” – Dessert Storm Scheme.

REV03147

Well, i’m not fan of modern stuff, well, i love to see any well done model, but not for myself, i usually build WWII vehicles and paint figures between WWII and medieval era. So this time is a new subject for me, and everything have a reason. My birthday was a few weeks ago, and two of my cousins, who knows my hobby, gifted to me this nice Revell box, with his best intention, so i was morally forced to built and paint this set as soon as possible and here is the result. 🙂

 

Models itself are well engineered, as usually Revell does, parts fits well and flash is almost non existent, also any ejector pin is present in visible parts. Both models have a lot common parts, as all the chassis and suspension and some others. I was in trouble fitting the ambulance’s doors, i always think it is my fault, but this was the only part that not fitted so well, at least for me.

IMG_0219

I didn’t was in mood to try an European camouflage scheme, the typical three colors NATO scheme, so i tried to paint them for the “Dessert Storm” campaign. This was a problem, because the box only contains one set of “Desert Storm” decals, for the ambulance. In fact i didn’t found any evidence of the TOW carrier during the “Dessert Storm” in desert camouflage scheme, only some pictures of the 82nd airborne in European scheme. So i share the decals, the ambulance haven’t the distinctive marks for the operation, these were to the TOW, the ambulance have enough with the red crosses.

IMG_0206

A problem with the glue (Tamiya) let my fingerprint in the ambulance for the rest of his days :), i always say i’m not a fine builder.

IMG_0201

For this occasion i tried something new for me, to fix the pigment with “AK White Spirit” and the airbrush, it works quite well, i must say, so i also used intensively pigments in the bases.

 

About the colors i can’t say much, i avoid the usage of the brush as much as i can, so i used as base color the “The Army Painter” sand color primer, then i used pigments, AK wash, AK White spirit (to clean the wash excess), Vallejo Iraki sand (dry brushed) and not much more.

I’m quite happy with the final result, except for the fingerprint in the ambulance :).

These models go directly for the “For Sale” section, and in this case benefits goes directly to my cousins education, so be benevolent.
Price for both models are 30€ plus shipping.

IMG_0211

If you want to try yourself this model, take a look at our utility, to find this Revell box at the best prices.

Dragon M4A1 (76) W VVSS

I love Dragon Shermans, and especially the M4A1 with the 76 mm gun. I also think, as other Sherman lovers, it has the most “sexy” lines from all M4 range. I chose a registration from “Operation Cobra” with the distinctive black patches camo over the Olive Drab.

I started with the bogies; the skids were taken from an UM kit, and proved to be the ideal solution. However I had to add two more bolts on the interior of the skid, cause they were missing.

I glued the bogies into position and continued with the back engine doors. The tension mechanisms of the idler wheels was corrected, with the three bolts oriented downwards, not like Dragon indicates.

The tail lights must be moved a few millimetres back until it is aligned with the edge of the hull. I used aluminium beer can strips to simulate the brackets for fixing the tools on the hull.

The siren brush-guard was the most difficult to make, as it is not provided with the photo-etched parts in the kit.

I also modified the front fenders, as the one from the kit were incorrect.

But the most difficult part was to make and add the casting registration number on the turret. I also made a few modification, mostly on the rear of the turret, where I replaced the MG cradle and the L frames. After that I modified the loader’s split hatch into a “low profile” D94598 and add the MG barrel bracket.

The final assembly and adjustments.

After that I sprayed Vallejo Olive Drab and the camo black patches.

And the final result, after weathering with oil paints and some pigments.

 

This model is available in our utility here.

Italeri WWII German Sd.Kfz. 232 6 Rad 1/72.

Hello all,

This Early war German armoured reconnaissance car has been designed with war gamers in mind. It has only has one spruce which goes to say how simple the kit is, well saying that I still managed to have fun and games building this kit. A few fiddly bits and pieces to get lost or broken.

I love all things early war, I am not a fan of the “Tigers and Panthers” not that I wouldn’t build them, just I like the unusual. This kit fits the bill, you have the choice of four decal options, ranging from a vehicle on exercise to the blitzkrieg across France.

The body of the car has only four parts which fit together very well indeed, I believe this kit is a new tooling from Italeri which explains this. The turret is simple to build, but has closed hatches which is a shame. Opening them up is a little beyond my skills at the moment.

The wheels and suspension is very simplified which I do not believe is a problem because how often do you ever see the under side of a model? Unless the dio is of it jumping ten double Decker buses why worry.

The rest of the build was not as easy, things got “fiddly”. I would recommend using a quick dry glue or one with an activator for the mud guards and other little bits like the lane marks and head lights. The side lights met with the carpet monster one drunken night so they got left off. The front light met with my big sausage fingers and has not been sorted out yet.

The painting of the build did not go to plan either. I tried to hand paint it and it looked awful, so out came the airbrush and rescued it. I still think it looks a little dark but a touch of Tamiya weathering powder has lightened it up a treat.

I went for the 1940 France campaign for the decals. They like most of Italeri decals went with no problems with the help of some microsol. A great finish with that painted on look. The weathering was next, I used the normal MiG weathering pigments. This time I mixed Vietnam mud with a little dark mud and plastered the bottom and sides of the car. I tried not to go over board this time and think I like this look better.

 

Italeri 7022 DUKW

Today a transport model which was used by U.S.Troops and Britain. Model can be built in an easy way for gaming and in a more complex way for collectors. I took the hard way, although it means a more fragile model, not so ready for gaming, which is my intention.

Model comes in 3 sprue, decals plus clear plastic for windows (i didn’t put the glass).

I added some Airfix/Heller cloned boxes (from the willys jeep + cargo set), a machine gun (Airfix/Heller set) and a camouflage net which i did with putty.

About the paint i used Olive Drab and Dark U.S. Green applied by dry-brush, both from Vallejo.

Here with decals:

 

 

and here with mud and dirty, and the crew, the useful Hät tank riders. To see crew in detail take a look
here.

The set is available through our utility here.