Category Archives: Miniatures

Main category

28mm Red Box Games – Evil Barbarians

28mm Red Box Games – Evil Barbarians
You can find the whole range of these nice figures here.
Well, sculpture by Red Box, is top class, figures are very nice, well detailed, a pleasure to paint and collect. Of course, one feel shame when see the showcase paints.. and the own paint.. 😀 this is…
but, one can do what can do, no more.

In the batch there are several different figures. By one side there is a HelsVakt Hordesmen , six figures which a variety of weapons for your choice. At this point i must say i don’t like the kind of unions, only of the hand with the weapon.. they are very fragile.

To follow, there are three champions, Hakar the Horrible, SvartUlf the Savage and Bloody Garm not sure about this last one, because it shows a different weapon on the site. Those 3 are excellent figures.

And the last one is Belegast the Bloodthirsty.

Some family pictures to end.

28mm Warlord Games – Demi-culverin cannon

28mm Warlord Games – Demi-culverin cannon

If it was not enough artillery, a Demi-culverin always can save your day. It’s strange but this gun wasn’t in the arsenal.
Again i’m not very happy on how this ended.. i have been using a new brown paint, and i’m not sure if it works very well for this. I should have choose red or a very clear brown for this, as Warlord painted it to show. The one i most like, its the officer.. i usually don’t paint strips, but i think it looks very well. I promise to try more times.
The barrel itself, also don’t looks very good.. since i moved to the new house. i have lost several paints.. because my study is in a too hot room in summer. I planning to move the study this year, or re-condition the room.

A part of this, the gun is a nice piece, and the crew too. The big barrel on the base, came from a friend, with a nice range or resin things, Zona 72.

28mm – Warlord Games – Assault Petard

28mm – Warlord Games – Assault Petard

Well, i’m not very happy with this bunch of figures.. by one side.. it’s hard to don’t think in ECW looking at them.. so they should wear another colours.. but one of the premises was they weren’t for ECW.. so.
By the other side, i hate that kind of helmets, from the point of view of the paint.. they show the face, but it’s impossible to me decently paint them… Also i don’t specially like some of the poses.. and i did the error to put together the carriers before paint.. so was more difficult to paint them.

For sure this will not remembered as one of my best works, hope they will do they job in the battle and something will blow out.

28mm The Assault Group – Foundry – Polish Renaissance Command.

28mm The Assault Group – Foundry – Polish Renaissance Command.

This is the very end of the Polish Army.. it have been a quite long since the first unit.. till these just a few command figures. In the picture again a mix of TAG and Foundry, which you can see match very well.
The flag is the most beautiful flag from the range by Battle Flag, it have been reserved long time for this group.
Hope to start not very far with the Ottoman counterpart !!! so stay tuned.

28mm – Mantic Deadzone – Marauders, Enforcers & Asterians

Ok, Sci-fi isn’t my usual/favourite taste.. but a couple of friends have started a new adventure, called Anyma Distributions, and they will be carrying some Mantic stuff in Spain. As part of his business they running are demos for Deadzone v.2, recently released by Mantic. They run out of time, so asked me to paint some miniatures for their demos.. so here they are.

ASTERIANS

1

2

3

4

ENFORCERS

5

6

7

MARAUDERS

8

9

10

11

12

13

14

15

I hope next time they can handle a professional painter.. it will mean their business is a success.

28mm – Reaper Bones & Warlord Games – KoW Kingdoms of Men – General on Winged Beast

To end for today, a work i ended a couple of months ago, but never found time to take pictures. It’s a Reaper bones dragon, over a LOTR ruins reworked, raided by a Warlord Games cavalry man from their ECW range. Most of the work here was done by airbrush, except final lights and shadows and the rider figure.
He’s part of KoW army, kingdoms of men, in fact, he is the general of the army. Hope he will perform well in the battle.
I enjoyed a lot doing this, first of all, because it’s for me and not commissioned, second because it’s another try to improve my airbrush usage, and last one because i like it, and like how dangerous can be on a KoW battle.
The Reaper dragon it’s a nice piece, cheap, very cheap for his size.

IMG_2515

IMG_2516

IMG_2517

IMG_2518

IMG_2519

IMG_2520

IMG_2521

IMG_2522

28mm – Warlord Games – Imperial Tercio

Not much to say about the warlord figures, is not the first time i paint them, but this is the large number i have painted at once. Included with the well know plastic figures there is a blister of metal armoured pike men.
I tried to paint them in dark colours, without any concession to fashion and light colours, trying to depict a “poor” Sapanish tercio for the late Thirty Years War period.

Paper flags are from Wallenstein’s Imperial Army range by Battle Flag, this time are from Flags of War, who haves a nice range for this and other periods, and a very good quality.

IMG_2497

IMG_2498

IMG_2499

IMG_2500

IMG_2501

IMG_2502

IMG_2503

IMG_2504

IMG_2505

IMG_2506

IMG_2507

IMG_2508

IMG_2509

IMG_2510

IMG_2511

IMG_2512

IMG_2513

IMG_2514

28mm – Gripping Beast – Antigonid Companion Command (Polemarch Successors)

It have been a while since i painted more Macedonian successors, which can be viewed here.
This time i received only three mounted figures, by Gripping Beast, depicting a Polemarch command, Antigonid, but who can be used as part of any of the numerous successors kingdoms.
I did an error and mixed here some horses which are from the Carthaginian command painted at the same time.

IMG_2476

IMG_2477

IMG_2478

IMG_2479

IMG_2480

28mm – Gripping Beast & Crusader Miniatures – Carthaginian reinforcements.

To reinforce the Carthaginian army of my client, i was commissioned to paint a few generals plus an elephant with some extra crews for other elephants. Between the generals, the most famous one, Hannibal, is included. Those miniatures are by Gripping beast, while the elephant and the crew are by Crusader.
All figures are correct, but some of the horses are poor, very poor. Also mount the elephant, two valves of metal plus tower, all metal, was a bit of pain. Included in the elephant base there is a dead roman soldier, it’s a small resin piece, not sure which is the manufacturer.
All the elephant’s crew have been magnetized with a neodymium magnet, as well as the raider. In the base of the tower there is a metal plate, and hidden under the driver’s place, another neodymium magnet. Overall painted by brush, except the elephant who got a couple of coats by airbrush.

IMG_2496

IMG_2495

IMG_2494

IMG_2491

IMG_2490

IMG_2489

IMG_2488

IMG_2487

IMG_2486

IMG_2485

IMG_2481

IMG_2482

IMG_2483

IMG_2484

The September Issue II (Landsknecht).

Also this month, i was able to end some fillers for my upcoming 2 arquebus horde, so this time this is part of my own Kings of War army.
There is a good mix of brands here, including Pro-Gloria (now Warlord) , Warlord Games, Reaper and Lead Adventure.

They are 3 fillers, who take the space of 14 figures, with only 5, so i save 9 miniatures to paint (which is not a bad number talking about landsknechts). It’s the first time i try to paint landsknechts, i’m looking for a 4-5 standard combinations for the whole horde, i guess i already have found 2 i like, so only a couple more needed.

Well, the fillers are as follow:

Pro Gloria (Warlord) – Handbuchse Light Gun. 11952952_10207340402925421_5421145879703132573_o
It’s taking the space of 6 figures, so is not a bad deal, and i love this team, so i wont to paint it. I got the master gunner and though was a nice addition here, as the Pro Gloria guys are not aiming the gun at all.. seems a blind shoot. Some hard to put all together, not much space, as all need to be close to the gun, and the master gunner over it. I needed to add a stone in the back and a wooden box (Lead Adventure) to properly hold all the figures, but i think result is not bad.

Warlord Games – The Marksman.
12000911_10207340042916421_6743351065516283908_o
This is a beautiful figure i also liked to paint (The master gunner came in the same blister), but it have been some hard to emulate a landsknecht costume in this figure (around 100 years later), and the figure is not easy to paint. A lot of detail in the chest have very bad access for the brush. This filler save me 3 figures, as it’s on a 40x40mm base. Close to him is a Lead Adventure treasure chest (lovely piece).

Reaper – Anwyn, Female Bard.
12000838_10207340268362057_7707001371011697817_o
This is a lovely figure by Reaper, metal range, although she is also available in Bones range. Again the “landsknecht” costume don’t fits 100% the figure, although this time i think it looks right. I purchased this figure thinking in the previous edition of KoW, when you needed musicians and banners as options of your units. Now they are merely decorative.
The big barrel and the sac (big) are from Lead Adventure, while the small barrels and the small sac are from Warlord Games (P&S Mule team).

The whole horde will look something like this:
12002628_10207337039761344_3495112944466035811_o

A few pictures of all together, included a single Pro Gloria captain i already painted.
11053899_10207340434526211_5691148503098346097_o

11950272_10207340434006198_6227317493983193737_o

11892290_10207340433966197_5263517161054530563_o

11878876_10207340433926196_49460651439349272_o

12000843_10207340433366182_6299144320761149156_o

11934543_10207340433406183_3112235012855316291_o

11999710_10207340433326181_8114894798927092231_o

The September Issue (Dwarves).

Hi Folks, long time without publish anything there. I should remedy it.
I have literally thousand’s figures over the paint table. Everything started and just a few ended. Hope to start to finish some large parts soon. While this happen i already ended some single pieces, and eclectic mix, with a common factor, all are intended to play the fantasy game Kings of War, which is successfully running his second edition now.

First, i painted a few Dwarves for a friend who play with them. By one side i painted 3 females dwarves, who are part of larger unit, their captains. These figures are from the Tale of War (old) range.  They are nice sculpted, except, maybe, the faces. The pictures of the full units are not mine, are from the owner, you can follow all his work here (Spanish language)

11893734_10207241667297092_4267740680583565293_o

11884691_10207241669977159_6241674683416517479_o

11845214_10207241670657176_1240967699587700440_o

11875088_881235165295017_9132138284305638709_o 11017494_883757738376093_8271619122889132170_o 11908926_883174781767722_4685158127874910408_o

And second i painted 2 single male figures, from the Reaper Bones range, who will act as Stone Priests in the game. I enjoyed painting the left ones, even if it’s Bones, it’s a nice figure, with and overall good presence. I already talk about Bones in the past, it’s not best material to paint, as well as it present less detail than their metal counterparts, but they are cheaper, very cheap indeed, so they always are an option to don’t waste your pocket and get what you want. Price/Quality rate make them very attractive.
Left one is code 77220: Herryk, Dwarf Cleric which also haves metal counterpart, while right ones is 77383: Barden Barrelstrap This is one will be released in October..
11958045_10207340135438734_6243039308361520307_o
11952690_10207340136638764_6149188364881719343_o 11926052_10207340136238754_5400652144026778377_o 11957979_10207340136198753_2389099169819751744_o 11058199_10207340136158752_6123347481893865778_o

28mm – The Assault Group – Polish Pancerni Cavalry

28mm – The Assault Group – Polish Pancerni Cavalry

Long time without work on the Poles. The end of the army is very close, just a few command figures remain in my stash.
It have been a long work, over two years, and they needed a good end. Only better than those Pancerni could have been the Winged Hussars, but that was the first part of the army.
Any novelties used here, decoration on saddles have been done using nail’s decals, painting over them, a resource previously used. The stripped saddles are totally done by hand. Shields and pistol’s holders are decorated by hand.
All the figures used are by The Assault Group, flags and pendons by Battle-Flag.com

01-IMG_2008

02-IMG_2009

03-IMG_2010

04-IMG_2011

05-IMG_2012

06-IMG_2013

07-IMG_2014

08-IMG_2017

09-IMG_2019

10-IMG_2020

11-IMG_2022

12-IMG_2023

13-IMG_2026

14-IMG_2027

15-IMG_2028

16-IMG_2029

17-IMG_2030

18-IMG_2031

19-IMG_2032

20-IMG_2033

21-IMG_2035

22-IMG_2036

23-IMG_2038

24-IMG_2040

28mm – Gripping Beast – Carthaginian Spear Men & Numidian Cavalry

28mm – Gripping Beast – Carthaginian Spear Men & Numidian Cavalry

Not everything can be renaissance or fantasy… i also was commissioned to paint these ancient Carthaginian troops, mainly veteran spear men by Gripping Beast. I used shield transfers by Little Big Men Studios, you need to cut them in two parts, so it’s a long work. Figures are correct for their purpose. Some flash need to be removed, but nothing to be scared.
About the Numidian Cavalry i tried a darker skin colour, a total failure as you can see. I worked horses with airbrush, saving some time, although was complicated retouch them with brush. The shields also use Little Big Studios transfers. To use them in not flat shields you need some work, and result is not so good. But looking them at middle distance, they look good.
There is one extra figure who comes from a separated Carthaginian Allies pack, which i will end soon, as well as some other reinforcements for Carthage.

16-IMG_2007

15-IMG_2005

14-IMG_2004

13-IMG_2002

12-IMG_2001

07-IMG_1993

08-IMG_1996

09-IMG_1997

10-IMG_1999

11-IMG_2000

06-IMG_1992

05-IMG_1991

04-IMG_1990

03-IMG_1989

02-IMG_1988

01-IMG_1981

28mm – Mierce Miniatures – Creoda, Guthwulf

I had the pleasure to be commissioned to work this awesome and big piece by Mierce Miniatures, who haves and awesome range, although some expensive.
I worked here mainly with airbrush, almost everything.
Pictures and my work don’t make justice to this excellent piece. I only had a problem, with left rear leg.. although i tried to clean all it didn’t fit quite well.. and my work with putty to fill the gap is noticeable once painted. All the figure has a very tiny pattern (hair) which was impossible to reproduce in the putty. Anyway i’m happy with final result, quite similar to what i imagined. Another try with airbrush and i begin to feel good doing it. Most of the problems relay in have the paints in an appropriate state, enough liquid to don’t obstruct the airbrush but not too much. Achieving that all the rest is play with colours as usual done with brush. Next step begin to practice masking some parts, and to make outlines using floating masks…
Some one for sure will recognise a part from a LOTR kit in the base. All the rest is natural stuff, such stones and pine bark.

08-IMG_1959

09-IMG_1960

10-IMG_1961

11-IMG_1962

12-IMG_1963

13-IMG_1964

14-IMG_1965

15-IMG_1966

16-IMG_1967

17-IMG_1968

18-IMG_1973

19-IMG_1974

20-IMG_1975

21-IMG_1976

A size comparison picture:

IMG_20150419_223654

28mm – Games Workshop – Ogre Kingdoms Leadbelchers (Conversion KoW Ogre Army Standard Bearer)

I finished this single piece to ends the content of the Ogres Leadbelchers box, which contains 4 figures. In KoW 4 is a bad number for Ogres, you can rank 3 or 6.. so the remaining figure should be something different to a Boomer. I converted the figure, changing gun’s arm position, with some green stuff, cut here, cut there..
Base is made with cork fragments.
Some work is done with airbrush, as i’m trying to practice, a mixed technique airbrush/brush.
Although i don’t dislike the result i prefer the skin tone used in the Boomers. Anyway was interesting to try a different skin tone.

01-IMG_1952

03-IMG_1954

04-IMG_1955

05-IMG_1956

07-IMG_1958

22-IMG_1977

23-IMG_1978

24-IMG_1979

25-IMG_1980

02-IMG_1953

06-IMG_1957

28mm – Games Workshop – Ogre Kingdoms Leadbelchers (KoW Boomers)

28mm – Games Workshop – Ogre Kingdoms Leadbelchers (KoW Boomers)

portada-Ogres-GW

I purchased these guys to reinforce my Kings of War human army, but in the forthcoming V.2 i can only carry them as allies, it haves his benefits, although this concrete unit, Boomers, is beings restructured and they will not be so brutes as they were. Anyway i enjoyed a lot painting these, i used airbrush for the ogre’s skin, applying base coat and two highlights. I need to improve such technique a lot, but i like result, it’s the first time. Anyway i don’t feel confidence enough to apply it on nothing smaller than these ogres.. so. These are my first Ogres ever, but also my first Goblins, Red Goblins, as they should be because they are Ogre’s slaves… that say KoW rules.
To my taste, these ogres depict better the Boomers description than the Mantic Ogres themselves…
Hope you like them too.

01-IMG_1914

02-IMG_1917

03-IMG_1918

04-IMG_1919

05-IMG_1920

06-IMG_1921

07-IMG_1922

08-IMG_1924

09-IMG_1925

10-IMG_1926

11-IMG_1927

12-IMG_1928

13-IMG_1935

14-IMG_1944

15-IMG_1946

16-IMG_1951

28mm – Reaper Miniatures – Custom HeroQuest Heroes.

Custom HeroQuest Heroes

A friend usually plays this excellent board game (Heroquest) with his two ten years daughters. As they liked my painted miniatures i started to look for a small gift for them. First i was trying to acquire the original figures from the game, but.. uhh. they are quite expensive, even if there are a lot and they aren’t very good neither special figures. So then i started to look up for a dwarf, a mage, a barbarian and an elf in other brands.
I had pending to buy some Reaper miniatures for my own, so i took a look over his extensive range and soon i found what i was looking for.

Three of them are Reaper Bones (Except Barbarian), a very cheap range cast in a quite bendable plastic, not the best texture for paint, neither material, but for sure the cheaper one you will find around. Mage works pretty well, his stick was bended, as well as the elf sword, but a few seconds in boiling water (in a glass in the microwave), and it took a good position. I enjoyed a lot making the parchment’s details, and all areas are quite well detailed. Dwarf and over more, Elf, were not so easy to paint. In some areas detail is a bit confused, you are not very sure about what are you painting, and some details are very superficial. For example the Peacock in elf’s shield have some nice patterns everywhere.. but after prime and a base coat, neither a wash reveal them.
I read some forums before paint the Bones ones, some people seems to have problems priming this kind of miniatures. I must way it was fine to me. I primed them with white (Citadel) primer.
Barbarian is a metal cast figure, and it’s an excellent ones.

An the end, the little customers are happy with his present, so me too.

One last note, with my shipping, Reaper send a free sample paint bottle, from a brand i never tried before, called Master Series Paints (the full range is available in the Reaper store), and i must admit i like this paint.

1617413_10205977375490587_3356262898544470457_o
Reaper Bones: 77054: Galladon, Male Wizard
11036269_10205977375610590_8619078965883611150_o
Reaper Bones: 77054: Galladon, Male Wizard
11058674_10205977374890572_267576035730452035_o
Reaper Bones: 77074: Dain Deepaxe
11046981_10205977374970574_1540699155953540762_o
Reaper Bones: 77074: Dain Deepaxe
1669679_10205977375690592_2410893378115606419_o
Reaper Bones: 77044: Turanil, Male Elf Paladin
10818242_10205977376090602_1305340783446154255_o
Reaper Bones: 77044: Turanil, Male Elf Paladin
10295279_10205977374170554_3182635719403774152_o
Reaper Dark Heaven Legends: 03619: Cal Arath, Barbarian Prince
11000360_10205977374610565_348764085671286546_o
Reaper Dark Heaven Legends: 03619: Cal Arath, Barbarian Prince

10994630_10205977373130528_5731105699913095814_o

11021383_10205977373050526_8075351652259594243_o

11025669_10205977373090527_5150349982499417427_o

11034942_10205977374130553_7119658332827241274_o

28mm – Red Box Games – Lesser Undead.

Lesser Undead

This will be the year of many first times.. and this is the first time about zombies…
They are from the excellent range by Red Box Games, they have 9 different undead poses within his Infernal range, called LEsser Undead.

For decorating bases i took care of and old Woodland Scenics cemetery, it’s HO scale, 1/87.. but it looks right, not ??

It’s a not very hard work, they have a beautiful detail… but almost wearing nothing.. so not many to paint. I used different skin tones just to get some variation to the ranks.

More nice Red Box Games figures will come soon.. ok.. not so soon, just this year.

01-IMG_1853

02-IMG_1855

03-IMG_1856

04-IMG_1859

05-IMG_1869

06-IMG_1870

07-IMG_1871

10-IMG_1888

11-IMG_1890

12-IMG_1891

13-IMG_1892

28mm – HassleFree Fantasy Humans (and a Undead Necromancer)

HassleFree Fantasy Humans (and a Undead Necromancer)

I painted some of my single figures to start the year. All are by Hasslefree Miniatures, and all, have an excellent detail level, beautiful movement and perfect proportions. These figures, are probably the best i ever painted.
They are intended to join my Kings Of War Human’s Army. Some will be Heroes, some other will be ranked as captains. And probably Taxxis will never play.. who knows, she can be a good mage too.

I did some artistic touch on pictures this time, but i also attach original ones.

Taxxis (B)
Taxxis (B)
Ferrus
Ferrus
Volk the Bastard
Volk the Bastard
Akos the Scorned
Akos the Scorned
Libby & Sabre-tooth Tigress
Libby & Sabre-tooth Tigress

A family picture with some other beast i painted too…

23-IMG_1851

And the normal pictures.. (click on them to enlarge)

28mm – Mantic Games – Dwarf Kings Box.

Dwarf Kings Box.
Well box is not complete in this post because Berserker Lord was already painted a few weeks ago, take a look here to see him.

I used NMM everywhere in this work, they said practise is the way.. so i’m trying, but not very happy with result, seems that more practice is need. Anyway, at least Dwarf Warsmith looks quite good for me (Central figure), not so happy with other two, king (Left ones) and Army Standard Bearer (Right ones)

1-IMG_1787

2-IMG_1791

3-IMG_1792

4-IMG_1793

Not much more to say about this, this is probably last one in the year, now the stash is organized, Christmas season are not for paint, better to get drunk anywhere (and enjoy family, of course) !!!
As resume of this year i can say about 250 figures have been painted, among 4 elephants, 5 chariots and 10 guns.. not a bad year, isn’t it ?? All the works of this year can be found in the Gallery section, from Tatars & Cossacks to Ancient Indian and Macedonian Successors.
Next year will see the end of the Polish Renaissance army (Pancerni didn’t entered this year just by a couple of weeks more) and a lot of surprises and excellent miniatures by Red Box Games, Mierce, Mantic, Warlord Games or 1st Corps. We will try our best, as always (Hope to find also some time to my own KoW army, based mostly in Perry miniatures with some nice surprises by Hasslefree.).

As i will probably not will write again this year, i wish you a Merry Christmas and a Happy New Year.

28mm – Mantic Games – Dwarf Berserker Lord

28mm Mantic Games – Dwarf Berserker Lord

Not everything can be renaissance polish… so a small update with a very nice Mantic Games figures, a Berserker Lord for their Kings of War game.

1-IMG_1762

2-IMG_1763

3-IMG_1764

PAINT GUIDE:
Skin
For the skin tones i used the Skin paint set by scale 75, following more or less their guide included.
Base colour is Pink flesh (also can be used Citadel Dwarf flesh (old name)) , then i apply a wash of Citadel Ogryn Flesh (now called Reikland flesh tone).
Then two successive highlights with a mix of Pink Flesh + Gold Flesh increasing Gold Flesh in each iteration (This can be done also mixing Citadel Dwarf flesh + Elf flesh (sorry i don’t know the new names))
As this set haves another colour called Light Flesh i added two extra highlights mixing Gold Flesh + Light Flesh.
To end, very small touches of the Pale Flesh (Vallejo haves a similar skin tone called Light Flesh)

Gold Metal parts
Trying some NMM technique here, using Vallejo Model Color, from their special set for NMM.
Base colour is Heavy Brown, to add some more contrast you can give it a wash of Devlan Mud or Dark Tone by The Army Painter.
Then apply Gold Brown, and then 2 or 3 successive highlights with Gold Brown + White, increasing the white in each mix.
To end, a very small touches of pure white.

Silver Metal parts
Very similar to gold tones, but varying colours used. Base colour is Cold grey (also from Vallejo Model Color NMM set), apply a black wash, and then start to highlight with Cold Grey + White. To end a final touch of pure white in the edges.
The blueish tone around the gold area in the axes is done with diluted turquoise blue, mixed with some white.

Cape (Red)
Base colour is a dark red, Citadel have some one in their range, but any other will work. I apply a first highlight of Vallejo Flat Red, and then to homogenize tone i wash with a red wash (From The Army Painter in my case).
Then i highlight again with Flat Red and to end a final touch with Vermilion Red (Vallejo)

Cape (Back)
Maybe this is the easier part, and it can be done with a lot of colours, just choose your favourite brown or grey, depend on the style of cape you want.
I used Vallejo Brown Sand, washed with Dark Tone (Army Painter) , some parts where highlighted (dry brush) with the Brown Sand again and some other with a mix of White + Brown Sand. Some final touches of this last highlight were applied by brush.

Skull
Base coat is a pale white, such “Rotting Flesh” or “Skull white” , black wash the eyes caves, and then pure white.

Dwarf beard is done with a grey colour, washing black, and highlighting with pure white, first by dry brush and then some small touches with brush to emphasize some parts.

And that’s all.

And the forthcoming Kingdoms of Men army…

99% Perry figures
99% Perry figures

28mm – The Assault Group – Tatars & Cossacks

28mm – The Assault Group – Tatars & Cossacks

Mounted Cossacks – Irregular

First of all, a well bunch of Mounted Cossacks, as irregulars, the most common for those men. War in East Europe can’t be understand without Cossacks for a well bunch of centuries from Renaissance to WWII. So any army for this area period must have or fight some cossacks in their files, was usual to see these guys fighting with or against the Polish-Lithuanian Commonwealth, as well as fighting against Tatars, another folk with quite similar life way.
Both were famous for their raids, so cavalry was the most important part of the army.
Cossack organization were quite important and operative during this centuries and they were a pain in the ass for Ottomans, Muscovites and Polish-Lithuanian but also an important allied.

TAG provide a well bunch of blisters for this topic, so probably you can find there all you need to set up a Cossack party. Figures and casting haves the usual quality in the brand. To say and odd, maybe the horses aren’t best in the market, but they do his job reasonably well.

Paint all those hordes, with so many colour change are more tedious and laborious than other units, but at the end, the work is done. Officers’ capes are decorated using “nails decals”, yes you have read right, painting over them. Patterns are very limited but they can be useful, although this time we are not so satisfied with result as happened in the Haiduks regiments, where we used this technique for first time.

01-IMG_1723

02-IMG_1725

03-IMG_1727

04-IMG_1728

05-IMG_1730

Mounted Cossacks – Registered

Part of the Cossacks were in stable service of the Polish-Commonwealth, those we call “registered” cossacks, most of them Zaporozhian Cossacks. Probably uniforms were in-existent for those unit, but we take this license inspired by a work which was published in the old TAG gallery, unfortunately they changed their web site, ans seems to be not available any more.
Figures are exactly the same used for the irregular cossacks above (Who also are registered, as are intended to be part of the Polish army).
For the officer cape decoration i tried a new method based in some custom decal print, but it was a failure, but with this experience, soon i will show more work using this technique.

06-IMG_1731

07-IMG_1733

08-IMG_1735

09-IMG_1736

Tatars & Lithuanian Tatars

Tatars are the heirs of the “Golden Horde” of Genghis Khan’s, the west part of his empire. Tatars, mainly weren’t part of the Commonwealth, but some of them, in fact, were. The term “Lithuanian Tatars” is unknown for us, we reference it because so is how TAG call that blister. But their appearance and horses, are exactly the same used in Cossacks blister, opposite to Tatars, mounting the small steppe horses and with a different and characteristic costume. In the pictures all the “Lithuanian Tatars” are those using pistols, a nice addition to the Cossack horde, while Tatars, are carrying spears and bows, maybe some old fashioned for the period, but it was so. Posses are very dynamic, we specially like ones charging with the spear and those firing the bows. Well done figures.

10-IMG_1739

11-IMG_1740

12-IMG_1741

13-IMG_1743

Cossack on Foot

Although Mounted Cossack were the most important for raids, Cossack on foot were also raised in high numbers during this period. TAG also haves a well bunch of references for this, providing pike as well as musket figures. Pistols and sabres are common too. In the ranks we see an Orthodox priest, a gift figure by TAG, as well as a drinking Cossack, which also is part of the gift range for the Renaissance era.
Completing the rank some Muscovite guards. We already used some of them in the Haiduks ranks, but here it’s just a question of clean the stash !!

Two flags are my own pattern, middle one by Battle-Flag.com
Two flags are my own pattern, middle one by Battle-Flag.com

15-IMG_1746

16-IMG_1747

17-IMG_1749

Priest is a nice figure, from the Gift figures by TAG
Priest is a nice figure, from the Gift figures by TAG

All the batch.

And that’s all. Sorry for the poor quality of picture below. Another batch of the army completed. We start now the last one, the well know and beautiful Pancerni. Also we are working in some gabions positions for the artillery and a small surprise which can’t uncover today.

Family picture for this batch.
Family picture for this batch.

Hope you like them, best regards.

28mm – Mantic Games – Dwarf Berserker Brock Riders Regiment

Dwarf Berserker Brock Riders Regiment

Something different for today.
A friend will assist next Weekend to the first Official Regional Tournament of “Kings of War” in Madrid (Spain). As he run out of time to bring his army fully painted to the tournament i offered my help painting this beautiful Dwarf regiment, mounted in Brocks !! a very different subject to our usual work.

1-IMG_1656

This figures are cast in a sort of soft plastic / resin, right arm is separated so you have different combinations. The three especial figures have the the right arm cast of metal. The musician, that sort of auto-drum, get a lot of metal in the right arm, so it’s a very unstable figure even once based. If you works your own one try to put the arm as closets to the body as you can.

2-IMG_1658

Another hard point in this figures are the capes, you must need to work with putty to fill the junction on shoulders, is a not very well engineered part. Also for our personal taste, fabric capes would allow a more colorist / striking paint work, but they are skins, probably also of Brock, although we avoid the same pattern used in Brock to don’t homogenize to much colours used.
Also you have to take care about the cape angle, or it will avoid a correct position of the saddle over the brock, as cape block the correct position because hit the brock’s back before the saddle is in the correct position.

3-IMG_1659

4-IMG_1660

Heads, some Brocks armour plates, and Brock’s heads for the capes are also separated parts. I prefer to don’t use the Brock’s heads in the capes, but they already came glued to me.

5-IMG_1661

There are just a few parts were you can put colour, so i used blue, easy to highlight and very striking, to counteract so many metal and skins.

6-IMG_1662

Brock can be painted in several patterns, just take a look at real ones and choose your right ones. They came in two valves and there are two different poses.

7-IMG_1663

8-IMG_1667

Overall detail in figures is very good, there are some small mould lines, and the soft material used not always easy to work with a knife in intricate parts, but they are very nice figures.
It have been a pleasure to work on something different for a while.

28mm – Polish Renaissance & Cossack Flags.

Polish & cossacks Flags.

I was looking for some decent Cossack flags as well as some flags for my Haiduks regiments, but at the end i didn’t found any commercial ones of my taste. If you have been following my work for this period, you know i already used Battle-Flags.com ones but even if they are excellent flags, they don’t cover all my needs.

So, after some time looking for them, i committed myself to give a try to my skills with Photoshop, and i found on Wikipedia a great source of plain flags to work on it. Most of the work is based on Alex Tora work, but not only. After check all images copyrights, i’m allowed not only to use them but also to distribute my work, which hopefully will be used by other period enthusiast. Remember always that flags are sized for 28mm figures. It’s possible to reduce and adapt them to 15mm, but if you try to make them bigger it can implies a quality loss.

NOTICE: Find high resolution files links below, don’t print images showed here.

I did 3 plates to full fill my needs. Maybe the mix on the plates haven’t much sense, as it’s a mix of Polish and Cossacks flags, but i did it just thinking on my needs, and not in distribute it.

Plate 1
PLATE-I
Credits of the image as follow:
Chorągiew królewska króla Zygmunta III Wazy.svg by Olek Remesz, licensed under the Creative Commons Attribution-Share Alike 2.5 Generic, 2.0 Generic and 1.0 Generic license.

Zaporozhian Sich flag.svg by Alex Tora licensed under the Creative Commons Attribution-Share Alike 2.1 Japan license.

Flag of the Cossack Hetmanat.svg by Alex Tora released into the public domain.

And five flags contained in Alex K Kozaks flags 1651-00.svg by Alex Tora picking up flags by flag from his gallery, licensed under the Creative Commons Attribution 3.0 Unported license.

SEE COMMENT BY NORB BELOW, according to https://encyklopedia.pwn.pl/haslo/Orzel-Bialy;3952080.html the White eagle pattern i used doesn’t fit the period, as belongs to a more modern pattern. Sorry for the inaccuracy.

Plate 2
PLATE-II
Credits of the image as follow:
Herb Polski.svg by Follow by white rabbit
. This image is in the public domain according to Article 4, case 2 of the Polish Copyright Law Act of February 4, 1994 (Dz. U. z 2006 r. Nr 90 poz. 631 with later changes) “normative acts and drafts thereof as well as official documents, materials, signs and symbols are not subject to copyrights”. Hence it is assumed that this image has been released into public domain. However in some instances the use of this image in Poland might be regulated by other laws.

Four flags contained in Alex K Kozaks flags 1651-00.svg by Alex Tora picking up flags by flag from his gallery, licensed under the Creative Commons Attribution 3.0 Unported license.

Two of the religious banners are using parts of Zaporozhian Sich flag.svg by Alex Tora licensed under the Creative Commons Attribution-Share Alike 2.1 Japan license.

Plate 3
PLATE-III
Credits of the image as follow:
Herb Polski.svg by Follow by white rabbit
. This image is in the public domain according to Article 4, case 2 of the Polish Copyright Law Act of February 4, 1994 (Dz. U. z 2006 r. Nr 90 poz. 631 with later changes) “normative acts and drafts thereof as well as official documents, materials, signs and symbols are not subject to copyrights”. Hence it is assumed that this image has been released into public domain. However in some instances the use of this image in Poland might be regulated by other laws.

Chorągiew królewska króla Zygmunta III Wazy.svg by Olek Remesz, licensed under the Creative Commons Attribution-Share Alike 2.5 Generic, 2.0 Generic and 1.0 Generic license.

My design of the Haiduks flags are inspired but freely adapted from the ones showed in the Stockholm Roll

 

Plate III Re-Do

Changed some colours as well as size for these infantry flags, which should be bigger than cavalry ones.

PLATE-IV

Download:
Please, note than images showed here, are low resolution ones, i don’t recommend to print that files, instead of them, you can use the following links to download the high resolution ones, allowing to you a good printing. (Click right button and choose “save link as” or open in new tab to see the full image)
UPDATED 14/08/2014, png files changed to high resolution pdf for easier print.
Plate I Full Resolution.
Plate II Full Resolution.
Plate III Full Resolution. (NOT RECOMMENDED USE PLATE IV INSTEAD OF THIS)
Plate IV Full Resolution.

Instructions & Recommendations for printing:
High resolutions files will looks too big if you open them in an internet browser or picture viewer, this is because they are coded at 300dpi resolution images. If you open them in a image editor program such Photoshop (Commercial) or Gimp (Free), you will find they are adjusted to full fill an A4 landscape orientation paper. If you go to a professional print centre they will know how to handle this. Cost to print one single page (full digital quality) should be around or less than 50 Euro cent.
About the paper i recommend to you a matte paper, and as more slim as the printer can. Avoid thicker and brightness papers used in print centres, and ask him for standard paper, or best of all, archival matte paper (for ink-jet printers). If you plan to print yourself the flags, at home, i recommend to you the usage of the archival matte paper. It’s an inversion, but you can use this paper to print tons of flags, which surely you will need in the future.
Some colour tones like blue or red vary from printer to printer, i adjusted tones used in the images for my printer. If you feel as wrong some of the colour and can’t change colour configuration in your printer, i can supply you original PSD files, so you can directly modify the image colours.

Hope you find this useful, soon i will show how they look onto my Haiduks and then onto the Cossacks as soon as they will be available.

And now how they look !
Mostly showed here Plate IV, at the end my Haiduks regiments have some flag.

I used an old injected ink printer, with a special matte paper, at the end, i’m happy with final result, although it need several tries, printing from several programs. I used “photo quality” in the printer configuration. To save troubles to others i converted downloadable files to pdf format, which should works good for everybody.

5-IMG_1655

4-IMG_1653

3-IMG_1652
First flag on the left is not mine, it’s one of the flags purchased at Battle-Flag.com, good to compare quality and size of my own ones.

2-IMG_1651

1-IMG_1650

Regards.

28mm – The Assault Group – Krakow Militia

28mm – The Assault Group – Krakow Militia

Renaissance is a period full of interesting units, some times everything looks the same, pikes and muskets in a sort of colours populated all the armies from Germany to England. Eastern topics and Ottoman empire add a touch of colour and a well bunch of “exotic” topics. But almost each country had particular regiments which are a pleasure to paint and depict. The Krakow Militia, is one of the best exponents of this. Krakow is a western polish city and in the time, and now, very influenced by Germany, in costumes and all. Also it was a rich city and because this his militia was full equipped and dressed at the time.
Based on an excellent picture from an Osprey book, this guys are usually depicted as showed here, dated so for early 17th century.

IMG_1190

IMG_1191

IMG_1195

IMG_1202

IMG_1204

IMG_1278-001

IMG_1280-001

IMG_1289-001

All figures are by TAG (The Assault Group) who provide you 3 different blister for the topic, two musketeers one plus a command, which includes a drummer ,flag bearer and two officers.
The flag itself is hand painted, i did a b/w print including cross and then hand painted it, although probably blue tone is not the very right ones.

Yellow strips are already sculpted in trouser but not in jackets. Best way (for me) to handle this was to paint a wider yellow strip and then one slim blue strip in the middle, that works better (for me) than try to paint two slim parallels yellow strips.

This ends the infantry scheduled for the Polish army (that think my client), joining the four Haiduks regiments already delivered, for a big total of around 125 infantry figures.

28mm – Renaissance Artillery.

28mm – Renaissance Artillery. The Assault Group – Warlord – Bicorne – Lead Adventure

A nice mix of brands to make a whole artillery battery for the Polish Renaissance Army. It includes from “super” heavy pieces to the very small Cossack sled guns, and a mix of artillery crews in eastern/Cossack style and German/Western style.
From big to small they are as follows.

Super Heavy Artillery. Lead Adventure BRU-42 Cannon “God’s Hammer”

Lead Adventure produces some awesome miniatures, based on Fantasy subjects, but within his Bruegelburg range, a sort of dystopia Renaissance, you can find several useful items. Specially caught my eyes the beautiful and big cannons, and i choose the God’s Hammer ones to reinforce this artillery battery. It can look some fantasy at first sight, but as other times, truth is stranger than fiction, and after take a look at Tsar Cannon i found this Lead Adventure gun more than possible to happen in truth.

Tsar Gun
Tsar Gun

IMG_1248

IMG_1250

To give the whole scene more contrast i painted crew in red tones.
To give the whole scene more contrast i painted crew in red tones.

IMG_1249

IMG_1251

Cast quality is top level, as the sculpture is. I painted it using a sort of NMM technique in a base of metallic colours, using mainly vallejo model color paints.
The artillery crew is by The Assault Group, Russian labourers/gun crew REN208 painted in a mix of old Citadel & Vallejo paints.
Washes here, as in the whole lot, are mainly from the Army Painter, including coloured ones.
Tufts are this time a novelty for me, as for first time i’m using Tajima1 tufts, who haves a good and recommendable range.

Size Comparison with the largest guns by TAG & Warlord.
IMG_1258

Heavy Artillery. TAG – Warlord – Bicorne (Only Crew)

Next we have 4 ordinance pieces, 3 by The Assault Group and one by Warlord Games. The Crews are a mixing of TAG, Warlord and Bicorne, plus two Warlod Plastic conversions, to fill gaps in the crew numbers. The group is intended to have 4 crew men per gun, Bicorne pack has five figures and the Warlord conversion fill the gap of Fuse men not included in the TAG pack (TAG has another pack which include Fuse men). Fuses itself are a separate accessory pack also by TAG.
As the intention for the whole Polish Army is to cover from early 17th to late 17th century different period weapons are depicted here.

IMG_1221

IMG_1222

IMG_1223

IMG_1224

IMG_1226

IMG_1229
Warlord guys, second figure in the left, is probably the best figure in all this batch. The right guy comes with Bicorne crew. The officer has changed his sword by a fuse to make numbers.
IMG_1230
Bicorne guys, they are quite big for 28mm scale, but are good figures. The officer remember to me to that 1/72 used by Revell in his artillery set for the period.

IMG_1232

IMG_1235

IMG_1237
The Assault Group guys, they come 4 per pack, but the pack used here haven’t fuse men.

IMG_1238

IMG_1241

IMG_1242

IMG_1243

IMG_1244

IMG_1247
Two Warlord Plastic guys reinforce TAG crews.

And now a size comparison picture with all the crews used in this batch.

Warlord Plastic and Bicorne are quite big for the scale, while Warlord Metal and TAG are the smaller in the batch. In the middle, a guy from the Krakow Militia by TAG
Warlord Plastic and Bicorne are quite big for the scale, while Warlord Metal and TAG are the smaller in the batch. In the middle, a guy from the Krakow Militia by TAG

All figures and guns have a good cast and sculpture. Probably, about the sculpture, Warlord metal guys are one step above, plenty full of crispy detail.

Light Artillery. The Assault Group (TAG)

To end this batch, the smallest pieces. All by TAG, also the crew used here, which is Cossack labourers/gun crew
REN207. This is just a way to depict the batch, as all the crews are intended to operate any of the guns. Only the two sled guns are purely intended for this Cossack guys.
Again, a mix of early and not so early pieces are showed here to cover all the 17th century.

IMG_1206

IMG_1210

IMG_1212

IMG_1215

IMG_1217

IMG_1218

IMG_1208

A family picture.

All the guns.
All the guns.

All the guns & Crews.
All the guns & Crews.

So at the end, we have 10 guns, 2 sled guns, 3 light guns, 4 heavy guns and 1 super heavy gun. I hope it’s artillery enough to support the Polish army. The 38 crew men are intended to be used in crews of 4, except the sled guns, with two crew men assigned, and can be used in a lot of combinations, having all crews at least one fuse men, and there is one extra crew, the Russian style ones.

28mm – 1st Corps – Macedonian Successors & Ancient Indians.

Macedonian Successors & Ancient Indians.

One client commissioned me to reinforce two of his existing armies, and antagonist ones. By one side, Macedonian successors, a term which can mean a lot of different kingdoms over a couple of centuries at least. By the other side, Ancient Indians, suitable to face Alexander The Great himself or one of his successor kingdoms.

All the batch is based in 1st Corps Miniatures, a brand with a wide range from Ancients to Sci-Fi, through Medieval or Second World war.
This have been my first time with ancients 28mm, and mixing feelings came in the end. Is not my best work, for sure, I’ve enjoyed some parts and not so much others, but at the end, the work is done at an acceptable quality, i hope.

To begin the show, some very nice beast of war, two war elephants, references EL, C. Indian Elephant and EL, D Indian Elephant as well as two dead elephants, reference EL,M. Dead Elephant with tower.
This elephants are all cast in resin, with some metal parts as fangs and trunk (except the dead elephant who haves it already cast in resin). Cast is very fine, no bubbles neither resin excess. To correctly fit trunks and fangs you will need some putty to fill gaps, but nothing specially hard. Crews used here are reference ELC07 Successor crew 5, this reference seems to be intended for larger towers, as it comes with five figures, one driver and 4 men for the tower, two armed with bow, and two armed with pike. In this case, as my client need all the crew to be removable, it means more flexibility, as he can aim them with 2 bows, 2 pikes or 1 & 1. Fit drivers in a right position was the harder task about these elephants. I made two putty cushions to solve this, as well as all the figures haves a neodymium magnet in the base, towers has a metal plate in the bottom, so all the figures you see in the pictures are easily removable or changeable to fit my client needs.

MACEDONIAN SUCCESSORS WAR ELEPHANTS
IMG_1137

IMG_1139

Although crew set comes with several small rounded shields, i used here spare parts from the Wargames Factory Amazon Warriors, and transfers by Vini Vidi Vinci Studios.

IMG_1141

IMG_1142

Continuing the show, two beautiful scythed chariots, reference MSS61 4 horse scythed chariot which is randomly supplied with two different drivers. They are beautiful pieces, i made an error putting the reins, as all left side ones must go to one side, and all the right ones, to the other, otherwise it should be impossible to govern these horses. The archers showed in pictures are from the elephants, i just put them there to avoid have them loose in the table. In this case, drivers are fixed. To complete this part, also two 2 Wrecked scythed chariot, reference MSS62, are showed here. This reference came in two parts (resin cast), plus some small parts cast in metal, but i build a single scenery piece for each.
I tried to give these horses a different appearance, and i think i achieved it.

SCYTHED CHARIOTS
IMG_1149

IMG_1150

IMG_1151

IMG_1152

IMG_1153

IMG_1154

IMG_1155

The Indian army also haves his own chariots, in this case a unit pack reference INDU9 Light Chariots which includes three chariots and i aimed them with two crew each. These figures are removable, also haves a neodymium magnet in the base and chariot base haves a metal plate. With this condition, i didn’t find a way to put reins.
To decorate this chariots i tried a new (for me) technique, i printed some patterns and then paint over the pattern. Final result is not bad to my eyes, so i will try again this technique in the future if possible.

CLASSIC INDIAN LIGHT WAR CHARIOTS
IMG_1147

IMG_1146

IMG_1145

IMG_1144

IMG_1143

Macedonian Successors still got some more reinforcements, now reference MSSU01 Thureophoros attacking overarm x 16
Standard is a Vini Vidi Vinci transfer. All decorations here are hand made.

THUREOPHOROS
IMG_1156

IMG_1157

IMG_1158

IMG_1159

Last for Macedonian, a Greek Oxybeles, reference GRK38.

GREEK OXYBELES
IMG_1160

IMG_1161

IMG_1162

The Indian army still got a large batch of reinforcements, comprising the following references: INDU5 Cavalry x12, IND22 Forest Indians / bow, IND13 Maiden Guard command and INDU4 Longbow men x 40 and the pictures below are showed in the same order. Deal with skin tones was a real pain, and at the end, this is the part which makes me less happy in the project. All the standards are made of paper and hand painted.

ANCIENT INDIAN CAVALRY
IMG_1163

IMG_1164

IMG_1165

IMG_1166

IMG_1167

FOREST INDIAN WITH BOW
IMG_1172

IMG_1173

IMG_1174

MAIDEN GUARD COMMAND
IMG_1169

IMG_1171

IMG_1168
ANCIENT INDIAN LONGBOW MEN
Most of these figures haves a separate hand, the one with the bow, which not always fit well, so some trim is need in a few of them. Many of them haves also quite visible mould lines. Fortunately white metal is very workable with a knife, although it means spent more time than you desire to clean figures. This, and the continuous change of colour to achieve variety made this batch the most tired to paint

IMG_1175

IMG_1176

IMG_1177

IMG_1178

IMG_1179

A couple of family pictures to end.

IMG_1180

IMG_1181

Bases are mostly decorated with The Army Painter tufts, plus some natural small stones (re-painted) and leaves are by “Secret Weapons Miniatures”. Paints used includes Vallejo (Model Color & Game Color), Citadel (Old Range) and The Army Painter (mostly washes).

28mm – Polish Haiduks – Foundry & The Assault Group.

28mm Polish Haiduks – Foundry & The Assault Group.

As part of the commissioned Polish Renaissance Army, some Haiduk regiments were need. They are just 4.
First showed is the Guards unit, totally based in TAG figures, which haves a well bunch of blister dedicated to this topic, including a command, so TAG, bring you 2 different command blister, which includes Officer, Boy and two Standard Bearers. Musicians are taken from another TAG blister, only dedicated to this.
To complete de 27 figures, i used in this regiment an halberdier in Muscovite costume.

Guards unit
Guards unit

IMG_0990

I take some special care of most of the officers, decorating his capes.

Guards command detail
Guards command detail

IMG_0992

IMG_0993

Second unit is a common blue-red pattern, also 27 figures, showing a mix of Foundry and TAG, although TAG numbers are higher. TAG provide you a Command blister, 3 different Haiduks blisters (Firing, Loading and Advancing). Plus the already commented Musicians blister and some other extras as the horse holders i used with the Bears.

IMG_0995

IMG_0996

IMG_0997

IMG_0998

Command detail
Command detail

Third regiment shows an also well know pattern, blue-yellow, and also is a mix of Foundry & TAG. Foundry sculpture is pretty nice, but they have two problems for my taste, their command set is very good, you have musicians included there as well as Officers, two of each poses, but they haven’t boys. The Haiduks blister contains 8 figures each, one blister is firing and the other is marching, but all the figures are exactly the same pose. While figures are pretty nice sculpted, casting have several problems in both poses, which becomes to have moulding problems, and some areas have a lot of extra metal and no detail. That’s really an odd.

IMG_1001

IMG_1002

IMG_1003

IMG_1004

Command detail
Command detail

Last pattern is based in a picture, showed in an Osprey book, but i found it searching in the net, coloured with this pattern, as Osprey book show it in black&white.
While Foundry blisters are too repetitive and have some moulding problems, TAG bring you a lot of flexibility to built the army, 3 different blisters of 4 figures each, all in different poses, plus two commands including the Guards one, a musician blister and the horse holders one. Also used in this unit is a gift figure, the one drinking.

IMG_1007

IMG_1010

This scheme is based in a picture included in an Osprey book, Osprey show it black and white, but you can found it colored searching on the net
This scheme is based in a picture included in an Osprey book, Osprey show it black and white, but you can found it colored searching on the net

To don’t get bored painting so many equal figures, i imagined an extra unit for this army, for sure it’s not historically correct, but…
Bears are done by Foundry, three different poses, I found useful here the Horse Holders blister by TAG, as well as the peasants blister. The peasant blister is clearly inspired in the Osprey illustrations, as well as many other figures by TAG. The other problem was to find an appropriate chain for this… it was solved one day with my girlfriend in a H&M store. A jewelry chain is used here, it cost to me 5€.
It’s an item not useful for games, but, i found it’s a good decoration ones, and a distinctive for this army.

IMG_1012

IMG_1017

IMG_1015

When Foundry bears meet TAG and H&M
When Foundry bears meet TAG and H&M

With so many blisters purchased, at the end i had several extra figures, together with another TAG gift, the excellent Ottoman figure. Also included here, is a Cossack foot officer, which comes in another TAG blister. This cossack officer is also depicted in an Osprey illustration, and i tried to paint him as showed there.

Extra figures, the Ottoman officer is a very nice figure, gift by TAG guys.
Extra figures, the Ottoman officer is a very nice figure, gift by TAG guys.
Back details for the extra figures
Back details for the extra figures

Some family pictures here…

Family picture, the four regiments plus bears and extra command.
Family picture, the four regiments plus bears and extra command.

IMG_1022

IMG_1023

IMG_1025

IMG_1026

I’m sorry to show these units without flags, but i still waiting for a new Flag Sheet for Haiduks promised by Battle Flag.

28mm Warlord Games – Hugo Raleigh – King’s Guard Ensign

Hugo Raleigh – King’s Guard Ensign

A small update…
Obviously seeing the flag… he is not Hugo Raleigh 🙂

I used this nice figure as complement for my converted French King’s Guard and to test the paper flag, by the same brand used in the Winged Hussars, Battle-Flag.

(Click the images to enlarge)
Galeria 3

Galeria 31

Sorry for the poor quality pictures, i don’t know why , today’s light was not good…

28mm – Polish Winged Hussars.

28mm Polish Winged Hussars.
The Assault Group & Warlord Games. Polish Renaissance Winged Hussars

Well, i have been working around these guys some days. Well… many days !!!!
Although both brands are quite compatible in terms of size, Warlord ones are sightly smaller, both are intended for different periods, and seems hard or very inaccurate put them together in a tabletop game.

From ancient to modern the guys from The Assault Group are the oldies, according to Osprey books very appropriated for around 1600. The assault group have 3 different blister for this subject (REN004,REN005,REN006), one of them is the command one, which includes a trumpeter and a drummer plus the officer. I also used a special blister (REN069), to have an special command and flag-bearer.
I replaced the original poles of The Assault Group, they are more accurate, as they are ticker, but they seems to be quite bendable, and that can be a problem to play with them. These men only have a pistol in one of the horse sides, and you haven’t any weapon option, all the conversion that you can see in the pictures are done with spare parts form the Warlord guys.

IMG_0632
The guys in formation. You have several skin patterns, clearly showing that not all are leopards or tigers.
IMG_0631
Overall, these figures have some less ornamentation than the Warlord ones, so they are a bit easier to paint.
IMG_0625
The helmets allow to paint faces and eyes.
IMG_0626
I had some problems putting lances in the right position. You must drill the hands and you must force them to achieve a right position for all.
IMG_0627
All the wings are equal, so i used some of the spare wings from Warlord to achieve more variation, although it’s a bit historically incorrect. All these wings are attached to the saddle.
IMG_0624
The cross in the trumpeter is made of paper. To make the two colored poles i used masking tape.

The Warlord guys are very appropriated for Vienna, 1683.

These figures are plenty full of details and poses are very good, with the exception of a horse pose, which for my personal taste, is a bit odd. Warlord have these guys available as a boxed set and also in a blister of three. The problem of the blister is that the content is random. Poles are wired ones, a real weapon, but appropriates for games, as they will not bend easily.
You have different wings patterns, that’s very good, and some of the figures accept one or two wings, and some of them can be attached to the saddle, although i put most of them in their backs.
Two of three plumes in the command helmet came broken so i replaced them by spares from other Warlord sets.

IMG_0629
Details in horses and figures will give you a lot of entertainment.

IMG_0612

IMG_0610
Some of the figures allow 1 or 2 wings, although most of them clearly are intended for two wings.
IMG_0609
You have several weapons option, although you must cut the original hand and drill a hole to correctly pose the alternative weapon, which includes the hand.

IMG_0622

Some family pictures.

IMG_0630

IMG_0605

IMG_0637

It has been my very first commissioned work. Hopefully the client will be happy. I pray every night (to the spaghetti monster) so these guys will arrive safely and a happy customer will purchase again.
By the way, i think i will never paint again Winged Hussars, at least the Warlord Games ones, or at least in not so great number.
I have seen great works with these nice figures, i made a lot mistakes as always, but i’m quite happy with final result.

In this work the paper flags have been very important, and they are provided by Battle-Flag. You must deal with borders, as with any other paper flag, but they bend specially well. I didn’t do anything special with them, just follow their instructions here. My problem with the Warlord ones are that paper is too tick, and in this case i needed more flags than the ones provided in the Warlord boxes. It’s a pity because their designs are pretty nice.

Also a mention for the guys of http://www.warbases.co.uk/, who always have some more bases than the ones you ordered.

Both sites are a pleasure to deal with, as well as The Assault Group Company, and of course, Warlord Games.

The Warlord Games ones are also available through our utility here.