This is the very end of the Polish Army.. it have been a quite long since the first unit.. till these just a few command figures. In the picture again a mix of TAG and Foundry, which you can see match very well.
The flag is the most beautiful flag from the range by Battle Flag, it have been reserved long time for this group.
Hope to start not very far with the Ottoman counterpart !!! so stay tuned.
Long time without work on the Poles. The end of the army is very close, just a few command figures remain in my stash.
It have been a long work, over two years, and they needed a good end. Only better than those Pancerni could have been the Winged Hussars, but that was the first part of the army.
Any novelties used here, decoration on saddles have been done using nail’s decals, painting over them, a resource previously used. The stripped saddles are totally done by hand. Shields and pistol’s holders are decorated by hand.
All the figures used are by The Assault Group, flags and pendons by Battle-Flag.com
I was looking for some decent Cossack flags as well as some flags for my Haiduks regiments, but at the end i didn’t found any commercial ones of my taste. If you have been following my work for this period, you know i already used Battle-Flags.com ones but even if they are excellent flags, they don’t cover all my needs.
So, after some time looking for them, i committed myself to give a try to my skills with Photoshop, and i found on Wikipedia a great source of plain flags to work on it. Most of the work is based on Alex Tora work, but not only. After check all images copyrights, i’m allowed not only to use them but also to distribute my work, which hopefully will be used by other period enthusiast. Remember always that flags are sized for 28mm figures. It’s possible to reduce and adapt them to 15mm, but if you try to make them bigger it can implies a quality loss.
I did 3 plates to full fill my needs. Maybe the mix on the plates haven’t much sense, as it’s a mix of Polish and Cossacks flags, but i did it just thinking on my needs, and not in distribute it.
Plate 2 Credits of the image as follow: Herb Polski.svg by Follow by white rabbit . This image is in the public domain according to Article 4, case 2 of the Polish Copyright Law Act of February 4, 1994 (Dz. U. z 2006 r. Nr 90 poz. 631 with later changes) “normative acts and drafts thereof as well as official documents, materials, signs and symbols are not subject to copyrights”. Hence it is assumed that this image has been released into public domain. However in some instances the use of this image in Poland might be regulated by other laws.
Plate 3 Credits of the image as follow: Herb Polski.svg by Follow by white rabbit . This image is in the public domain according to Article 4, case 2 of the Polish Copyright Law Act of February 4, 1994 (Dz. U. z 2006 r. Nr 90 poz. 631 with later changes) “normative acts and drafts thereof as well as official documents, materials, signs and symbols are not subject to copyrights”. Hence it is assumed that this image has been released into public domain. However in some instances the use of this image in Poland might be regulated by other laws.
My design of the Haiduks flags are inspired but freely adapted from the ones showed in the Stockholm Roll
Plate III Re-Do
Changed some colours as well as size for these infantry flags, which should be bigger than cavalry ones.
Download: Please, note than images showed here, are low resolution ones, i don’t recommend to print that files, instead of them, you can use the following links to download the high resolution ones, allowing to you a good printing. (Click right button and choose “save link as” or open in new tab to see the full image) UPDATED 14/08/2014, png files changed to high resolution pdf for easier print. Plate I Full Resolution. Plate II Full Resolution. Plate III Full Resolution. (NOT RECOMMENDED USE PLATE IV INSTEAD OF THIS) Plate IV Full Resolution.
Instructions & Recommendations for printing:
High resolutions files will looks too big if you open them in an internet browser or picture viewer, this is because they are coded at 300dpi resolution images. If you open them in a image editor program such Photoshop (Commercial) or Gimp (Free), you will find they are adjusted to full fill an A4 landscape orientation paper. If you go to a professional print centre they will know how to handle this. Cost to print one single page (full digital quality) should be around or less than 50 Euro cent.
About the paper i recommend to you a matte paper, and as more slim as the printer can. Avoid thicker and brightness papers used in print centres, and ask him for standard paper, or best of all, archival matte paper (for ink-jet printers). If you plan to print yourself the flags, at home, i recommend to you the usage of the archival matte paper. It’s an inversion, but you can use this paper to print tons of flags, which surely you will need in the future.
Some colour tones like blue or red vary from printer to printer, i adjusted tones used in the images for my printer. If you feel as wrong some of the colour and can’t change colour configuration in your printer, i can supply you original PSD files, so you can directly modify the image colours.
Hope you find this useful, soon i will show how they look onto my Haiduks and then onto the Cossacks as soon as they will be available.
And now how they look !
Mostly showed here Plate IV, at the end my Haiduks regiments have some flag.
I used an old injected ink printer, with a special matte paper, at the end, i’m happy with final result, although it need several tries, printing from several programs. I used “photo quality” in the printer configuration. To save troubles to others i converted downloadable files to pdf format, which should works good for everybody.
First flag on the left is not mine, it’s one of the flags purchased at Battle-Flag.com, good to compare quality and size of my own ones.
Regards.
Scale models, miniatures, plastic soldiers, war gaming.